DK | DE | NO | SE | UK | EU

• Home
• Products
• Systems
• Case stories
• News
• Links
• About us
• Downloads
• Contact

• Air Handling Units
• Roof Fans
• Box Ventilators
• Roof Terminals
• Controllers
  • EXact control system
  • Try iTool for yourself!
  • MAC10 constant pressure regulator
  • MAC11 constant pressure regulator
  • EFC Electronic speed regulator
• Cooker Hoods kitchen
• Roof Ducts
• Wall Fans
• Box Ventilators
• Valves, diffusers and flexible connections

Try iTool for yourself! 

Follow the instructions below and you will get a direct connection to the ventilation unit in EXHAUSTO’s showroom in Langeskov.

You can now see how iTool works in real life. 
Among other things you can
- read parameters of operation and set values
- change operation parameters (within certain limits)

YOU WILL NEED TO DO THE FOLLOWING:

1.  Make sure you have MicroSoft Explorer 5.5 or a newer version
  and Adobe SVG Viewer 3.0
  If you do not have this software, download them for free here:
      

ATTENTION! iTool demo program is temporarily offline.

2. Start the iTool DEMO
 In order for you to change values enter
 Username: Demo
 Password:  demo

Please note! Normally the picture of operation will appear within a few seconds. However, if there are many users on the DEMO at the same time, there may be some delay.